news & press

  HVLP spray gun must have seen a lot of people, so do you know what about LVLP spray gun, if your answer is not to understand, then I use the rongpeng R830 spray gun to take you to try to understand the world of LVLP spray gun, and tell you why you should choose this gun as your must-have. LVLP spray gun is a kind of pneumatic spray gun with low flow rate and low air pressure, suitable for use in large workpiece places, the standard working pressure is 10-30psi, and the air consumption is 3.0-3.9cfm, suitable for higher viscosity coatings and water-based coatings (anti-corrosion materials, waterproof coatings, etc.), suitable for automotive surface spraying, furniture spraying, metal parts, top paint and other scenarios.

High paint utilization
The rongpeng air paint gun R830 achieves a transfer efficiency of more than 65% through optimized atomization technology and lower atomization pressure, which can achieve finer atomization effect, more uniform paint film and higher surface quality.
This means that more paint can adhere to the surface of the workpiece, reducing paint waste and reducing spray costs. In addition, due to its reduced overspray, the amount of paint used is further saved, and the pollution to the environment is also reduced.

Rongpeng R830 paint gun has 1.3, 1.4, 1.5, 1.7, 2.0 five nozzles to choose :
With an atomization pressure of 29-50 PSI and an air consumption of between 3.0-3.9CFM, the rongpeng R830 paint gun is suitable for water-based paints as well as high-viscosity paints. Because this moderate pressure and air flow can provide enough energy for water-based paints and high-viscosity coatings to atomize effectively, while avoiding problems such as excessive scattering or rapid drying of the paint due to excessive pressure, the paint can be evenly adhered to the surface of the coated object.
High flexibility
The size and stability of the spray amplitude affect the uniformity of the coating, and the appropriate spray amplitude can ensure that the paint forms a uniform paint film on the surface of the sprayed object, avoiding the situation that the coating is too thick or too thin. The proper setting of the spray amplitude helps to improve the utilization rate of the paint. Excessive spray amplitude may lead to waste of paint, and too small spray amplitude may not be able to cover the entire sprayed area, requiring more spraying times, R830 has a convenient adjustment of spray amplitude and spraying flow buttons, the upper knob is to adjust the spraying amplitude, the lower one is the spray amplitude, you can adjust it according to the scene you are working in and the spraying effect you need to avoid the above situation.