news & press

  Are you still looking for a suitable airless spray gun?The rongpeng 821 airless spray gun I think you can consider it, the 1/4 inch Feed inlet is suitable for most airless sprayers on the market, and the excellent atomization function definitely meets your requirements for spraying.

Filters are installed in the handle
The filter can effectively remove fine particles and impurities in the paint, such as dust and debris, to avoid the accumulation of these impurities at the nozzle, resulting in the nozzle clogging, and ensuring that the paint can be sprayed smoothly. Through filtration, the influence of impurities in the coating on the sprayed surface can be reduced, so that the sprayed coating is more uniform and smooth, and the appearance quality of the final product can be improved.
High-quality spraying
rongpeng airless paint gun 821 only use a special small-diameter nozzle with a diameter of 0.2-1mm, this kind of nozzle is suitable for high-viscosity coatings (fireproof, anti-corrosion coatings), small-diameter nozzles can atomize the paint into tiny droplets more finely, make the coating more uniform and smooth, reduce the orange peel phenomenon, and improve the quality of the coating. And the coating uses up to 3600psi, and the high pressure makes the paint more fully atomized when sprayed, forming a more delicate and uniform paint mist, so as to form a smoother and uniform coating on the spraying surface, effectively avoiding the uneven thickness of the coating and the orange peel phenomenon, and improving the aesthetics and quality of the coating. The combination of small nozzles and high pressure allows them to work at different pressures and adapt to a wide range of coating and application requirements.Therefore, it can be applied to roller shutter doors, door frames, furniture, ships, factories and other places anti-corrosion and fireproof material spraying and high-precision atomization painting

Wear-resistant and corrosion-resistant
Stainless steel gun body, stainless steel is a good corrosion-resistant and wear-resistant material, and it will not be easily damaged by corrosion in chemical and other working environments full of chemicals, which increases the service life of the gun and reduces the subsequent maintenance cost.And it is equipped with a 360-degree rotatable nozzle protective cover to prevent the operator from accidentally touching the nozzle or high-pressure parts during use, avoiding accidental injuries caused by high-pressure paint spraying, and improving the safety of operation.

Model：821
Type of feed：Pressure
Standard Nozzle：0.017''(517)
Operating pressure：3600 PSI
Pattern Width：254-305mm
Paint Connection： 1/4-18-NPSM