news & press

HVLP spray gun, high air volume low pressure spray gun, uses high air volume at low pressure. The air pressure at the air cap is usually less than 10 PSI, and the sprayed paint is more softly atomized, which can spray more effectively. Unlike traditional spray guns that rely on high pressure to atomize paint, HVLP can minimize overspray, reduce paint waste, and ensure smoother and more uniform results. Whether you are spraying cars, repainting furniture or refinishing doors, you can significantly improve your results.

Rongpeng HVLP spray gun H881 is one of the mature tools. This spray gun adopts durable aluminum die-cast gun body, and the sealing is better than casting. Stainless steel nozzle and copper air cap, the nozzle diameters are 1.4mm, 1.7mm, 2.0mm, 2.2mm and 2.5mm respectively, the larger the diameter, the greater the flow rate, which can support from small workpieces to large workpieces and different paint viscosities. Compatible with a variety of materials, including latex paint, oil paint, lacquer and varnish.

RONGPENG H881 has an operating pressure range of 2.0-3.5 bar, with low pressure minimizing overspray. While maintaining a wide spray pattern of 180-250mm. With a paint capacity of 600cc and an air consumption of 4.2-7.1 CFM, the H881 strikes a balance between efficiency and performance, with paint utilization exceeding 65%, compared to only 30-40% for conventional spray guns.

Choose the Right Air Compressor
To fully utilize the capabilities of pneumatic HVLP paint spray gun, it is critical to pair it with the right air compressor. HVLP systems require large volumes of air at low pressure, so the compressor must meet specific CFM and PSI requirements.

The Rongpeng H881 consumes 4.2-7.1 CFM of air, which means the compressor should deliver at least 7.1 CFM to ensure consistent performance. In addition, the operating pressure should be maintained within 2.0-3.5 bar (approximately 29-51 PSI). Exceeding this pressure range may result in overspray or an uneven finish. A 3HP air compressor is sufficient to support the use of the Rongpeng H881.

The versatility of the RONGPENG H881 makes it suitable for a variety of projects from furniture renovation to car repair.

For automotive repair, the Rongpeng H881's small-caliber nozzle fine spray has a smooth and flat finish. Use a 1.4mm or 1.7mm nozzle to spray water-based paint and keep a distance of 20cm from the surface. Overlap 50% between each spray to avoid streaks. The Rongpeng H881 is very labor-saving for car primer spraying.


Rongpeng H881 can also use a slightly larger caliber, 2.2mm, 2.5mm for furniture such as cabinets, doors and other wooden products. The low-pressure fine atomization spray can cover evenly without dripping or flowing, and the paint utilization rate exceeds 65%.

Perhaps you also want to learn about LVLP spray guns and professional sheet metal spray guns that are best for car repairs. You can click on the product pictures below to learn more.