news & press

What Pneumatic Tools Are Involved in Car Repair?

Regarding car repair, usually you may go to the repair shop when the car has some breakdowns, but have you really carefully observed what pneumatic tools are used in each part of the car repair, let's take spark plug replacement and tire replacement as an example, let's discuss it together.

The engine shakes
Let's take the failure of the engine ignition system (spark plug damage) as an example, the disassembly and assembly of the spark plug is generally around 20-35N.M, for example, the spark plug with a 12 mm thread: the torque is generally 20-25 N.m. Spark plugs with 14 mm threads: torque is generally in the range of 25-30 Nm. The torque of air impact wrench is generally more than 500 N.M (rongpeng RP7431) or even more than 1000N.M (rongpeng R901). The torque of the air ratchet wrench is just in this range, for example, (the torque of rongpeng RP7413 air ratchet wrench is 35.2N.M), and the internal structure of the engine is more complex, the space is small, and the air ratchet wrench can also better touch this area. Taking rongpeng RP7413 as an example, the product can reach the peak torque in 3-5 seconds, and the speed of 240rpm can quickly complete the disassembly and assembly of bolts and nuts. And the lighter 0.5kg mass can also be disassembled and moved at will in a small area, long-term work will not feel tired, the impact part of the use of IPSEN heat treatment technology, very wear-resistant and anti-deformation, after the completion of many times of work will not be easily damaged and deformed, about these advantages, this is undoubtedly a treasure for long-distance drivers, as well as self-driving enthusiasts.

Car tires

Then the disassembly of tires generally takes about 100-200N. M,air ratchet wrench 60 or so N.M torque change will appear inadequate, while air impact impact 3000N. The torque of M or so will also be overkill, at this time, the wind wrench is the most suitable tool, take rongpeng RP7431 as an example, rongpeng RP7431Pneumatic wrench is a reliable tool, its working torque is 570N.M, but it is equipped with five torque adjustment mode, the operator can adjust the torque gear according to the torque required for the disassembly and assembly of automobile tires. And the use of double hammer structure, can provide stable torque output, can ensure the consistency of work, 7500rpm speed may ensure the efficiency of work. The cylinder stator, hammer and anvil made of alloy steel are made of alloy steel, which is a wear-resistant material, which is not easy to damage and can also ensure the service life of the tool, which is extremely cost-effective.