news & press

Coil siding nailer is specially used for installing wall panels and deck tool, (for example, you need to add a layer of waterproof board to the outer wall of your house and install a layer of decorative wood board for the wall of the interior room, etc.), if your house is being renovated and you need to install wood planks or you are engaged in the decoration industry, this rongpeng CN65 You can consider it, the tool-free drive depth is precisely adjustable, and the nail penetration depth can be adjusted according to the thickness of the plank, To ensure that the wooden board can be perfectly driven into the wall and maintain the aesthetics of the wooden board, using 15-degree wire collated coil nails 1-inch by 0.083-inch to 3-1/4-inch by 0.091-inch, The full round nail can better penetrate the material, and the nail is rolled together by steel wire, which can be easily installed in the pneumatic nail gun to achieve fast and continuous nailing,a wall design to dozens of wooden boards to install, and the installation of a wooden board involves multiple nails, rongpeng CN65 200 magazine capacity, but also to ensure the consistency of work, There is no need to reduce the work efficiency frequently in order to replace the nails when working, and it can punch three nails per second, and the efficient nailing efficiency can also greatly reduce the operation time, which greatly increases the work efficiency.

A 360-degree exhaust system is installed
The exhaust helps to prevent the pressure in the cylinder from being too high, thereby protecting the internal components from damage, helping the nail gun to reset quickly, improving work efficiency and can reduce the noise and vibration generated by the nail gun during use, and improve the comfort of operation. Rongpeng CN65 coil nailer is equipped with a 360-degree exhaust device, when the nail gun compressed air is working, after completing multiple shots, the scene is changed to the next task or not used, the operator can choose the appropriate angle and direction, rotate the exhaust cover to discharge excess gas away from his position, reducing the potential harm of exhaust gas to the human body.

Ultra-high quality
Rongpeng air nailer CN65 and the gun body is made of high-strength alum alloy die-casting body, and the nail head and drive pin adopt German ipsen heat treatment technology, the nail head and drive pin after heat treatment will have higher wear resistance and impact resistance, the working pressure of rongpeng CN65 is 70-110psi, in the case of high pressure, at the moment when the nail is nailed into the board, it will produce a strong impact force, and this force will inevitably damage the nail head and gun body structure under long-term action. Even cracks cannot be used, and the heat-treated nail head and alum alloy material greatly avoid this unoptimistic situation. And the density of alum alloy material is low, the mass of rongpeng CN65 is only 3kg, and it is equipped with a comfortable non-slip grip, so that the operator will not feel tired after working for a long time, which increases work efficiency.

Model: CN65
Dimension: 320×310×128mm
Weight: 3.0kg(6.6lb)
Operating Pressure: 70-110psi(4.8-7.5bar)
Max.pressure: 120psi(8.3bar)
Load Capacity: 200pcs